很多使用推拉門的朋友有時候需要徹底的清洗推拉門，這時候就需要將推拉門進行拆卸。下面我們就來看看應該怎么拆卸濟南推拉門。

　　Many friends who use sliding doors sometimes need a thorough cleaning of the sliding doors, which will require removal of the sliding doors. Now let's see how to remove the sliding doors in Ji'nan.

　　1、找到插頭蓋底軌推拉門，覆蓋滾筒的調節(jié)螺釘?？吹姆饷嫔系拈T面板的端部朝下方。

　　1, find the plug cover, bottom rail sliding door, covering cylinder adjustment screw. The end of the door panel on the cover looks downward.

　　2、插入插頭和框架之間的一個小的平頭螺絲刀，撬起插頭走出門。

　　2. Insert a small flat headed screwdriver between the plug and the frame and lever the plug out of the door.

　　3、將螺絲刀插入每個孔和降低滾筒逆時針旋轉調節(jié)螺絲。

　　3. Insert the screwdriver into each hole and lower the drum counter clockwise adjusting screw.

　　4、卸下頭停止從部的框架的內側上的磁道。頭站是一塊金屬，適合在軌道和門。用的無繩螺絲刀卸下固定螺栓固定頭停止。

　　4 remove the head and stop the tracks from the inside of the top frame. The head station is a piece of metal, suitable for rails and doors. Remove the retaining bolt with a cordless screwdriver and stop.

　　5、打開推拉門與門面板搶每側。電梯的門上，和上拉的下軌底部的門。降低面板拉車門面板上軌道，門板設置你的出路。

　　5, open the sliding door and door panels to grab each side. The door on the door of the elevator and the bottom of the lower rail. Lower the panel, pull the car, the facade, the board track, and the door panels to set your way out.

　　6、從框架斷開固定面板的滑動玻璃門。根據您的特定的門，可以沿著部，底部和兩側的固定螺絲。用無繩螺絲刀卸下固定螺絲。

　　6. Open the sliding glass door of the fixed panel from the frame. Depending on your particular door, you can fix the screws along the top, bottom, and sides. Remove the retaining screws with a cordless screwdriver.

　　7、提起面板，在面板底部的拉出來底部軌道，拆卸完成。

　　7. Lift the panel, pull out the bottom track at the bottom of the panel and remove it.